PowrTex 15:1
The air-powered, super-atomizing, heavy material sprayer preferred by contractors for coatings and application projects where airless sprayers cannot be used.
- Sprays texture products in ready-mix or powdered formulations; drywall mud in an orange peel, splatter or knockdown finish; aggregated coatings, cementation coatings; cold applied mastic coatings such as fibered mastics, fireproofing, roofing and waterproofing; and other materials not suitable for airless spraying.
- SteadiFlo™ Valve – patented surge control minimizes pulsation and prevents material flow until atomizing air is turned on.
- SteadiFlo™ Valve prevents pack out when spraying aggregated and cementatious products.
- The slow-stroking, hard chrome piston resist wear from course aggregates.
- Hose lengths up to 200'.
- Formerly the SuperTex 15.
| Max. Operating Pressure |
1500 psi |
Max.Output
– Air Powered |
3.0 gpm |
| Max. Hose Length |
200' |
Air Compressor Size
Air Compressor
Recommended Minimum CFM |
User Supplied
50 cfm @ 90 psi |
Common Applications:
|
Orange Peel, Splatter, Knockdown, Aggregated Coatings, Cementatious Coatings, Cold- Applied Mastic Coatings such as Fibrated Mastics, Fireproofing, Roofing and Waterproofing |
| P/N – 5-Gallon Heavy-Duty Cart Complete * |
515-592 |
| P/N – 55-Gallon Drum Mount Bare |
515-597 |
| Tips Included and Size * |
1 – 3/8" |
| Gun Type * |
2' Pole Gun |
Standard Air Hose ID*
|
3/4" x 50' | |
*Maximum hose length is dependent on material viscosity.
*Included with complete unit.
