For larger interior and exterior projects. Designed for a broad range of applications – from architectural primers and paints to texture finishes to skim coat and joint compound.

PowrTex 6900SF 

  • Sprays texture products in ready-mix or powdered formulations; spray skim coat in a level 5 finish* ; drywall mud in an orange peel, splatter or knockdown finish; apply primers, finish-quality paints, block fillers and elastomerics.
  • Powered by a 5.5 hp Honda® engine with Low-Oil Alert or a 2 hp Extended-Life DC Motor.
  • Heavy-duty bypass valve and submersed inlet valve fluid section uses ceramic ball valves for smooth, uninterrupted application of joint compound and other heavy coatings.
  • Coolflo™ hydraulic pump with high-capacity filter runs up to 20% cooler than the competition.
  • Accutrol™ Pressure Control – Precise pressure control from 400 psi to 3300 psi, for spraying light-bodied coatings all the way up to heavy-bodied coatings.
  • HydraDrive™ – Proven reliable, smooth slow-stroking hydraulic drive eliminates gears and clutches.
  • Complete units are equipped with S-3 Spray Gun, Splatter Nozzle, 3/8" x 50' high-pressure airless hose, 1/4" x 5' flexible airless whip hose and two SC-6™ Reversible Tips.

*User supplied air compressor and splatter nozzle needed to spray texture finishes.


Specifications
Max. Operating Pressure   3300 psi
Max.Output
– Gas
– Electric

  2.15 gpm 
  1.25 gpm
Max Tip Size – Electric
Max Tip Size – Gas
  .036"
  .048"
Max. Hose Length   300'
Air Compressor Size
Air Compressor
  User Supplied
Electric – Motor
Gas – Engine
  2.0 hp Extended Life DC
  5.5 hp Honda®
Weight – Electric
Weight – Gas
  149
  165
Common Applications:
  Orange Peel, Splatter, (Level 5 Finish),
  Interior and Exterior Wall and Ceilings
  Paints, Blockfiller and Elastomerics
P/N – Complete*   600-150
P/N – Bare   600-151
Tips Included and Size*   SC-6™ Reversible Tips 427 and 531
Gun Type *   S-3 w/Splatter Nozzle
506-279    Electric Convertorkit
Standard Fluid Hose ID*
  3/8" x 50' Airless Hose
  1/4" x 5' Flexible Whip

*Maximum hose length is dependent on material viscosity.
*Included with complete unit.

 Configurations
ExL-DC Electric Motor
PowrTex with Direct-Immersion Fluid Section
S-3 Gun with Splatter Nozzle




 

Product Information

  • Product Manual
  • Brochure