A BREAKTHROUGH IN SPRAY FOAM APPLICATION

The Helix's patent pending electronic proportioning system is the first fully integrated electronically controlled dual system proportioner. This innovative system drives ultimate accuracy and total control.

1
2
3
4
5

HELIX™ PROPORTIONER

HELIX™ PROPORTIONER

FIXED 1:1 Ratio; 2,000 psi Proportioner

  • Smart connect dual pump system
    • Equal amounts of the A and B component increasing
    • yield and chemical performance
    • Improves accuracy by 3-5%
    • Independent priming and flushing
  • Integrated Electronic Proportioning
    • Continual communication between pumps
    • 64 communications back and forth on each revolution
  • VisComp – Viscosity calibration tool
    • TRUE 1:1 when you need it for demanding systems
    • Achieve chemical company and regulatory requirements
    • Fewer costly job reworks
  • 33% lighter than most comparable equipment
  • Available in Single Phase, 48 amp; Three Phase coming soon

SUREFIRE™ HEATING SYSTEM

Complete temperature control from the heater block to the gun

SureFire™ Heater Block

SUREFIRE™ HEATING SYSTEM

Complete temperature control from the heater block to the gun

SureFire™ Heater Block

  • Patent Pending high efficiency aluminum mass heater
  • Wrap around design provides over 30 seconds of dwell time
    • Greater surface area to heat chemical
    • Longer dwell time versus competitive one pass design
    • Internal turbulence increases heat transfer
  • Heating rod completely isolated from the coating
    • No failure from chemical
    • No failure from exposure to air when run dry
    • Change wattage or repair without opening the system
  • Modular – can stack two to four blocks
    • Easily customizable for 3 kW to 18 kW
  • Heat with less power
    • Requires a smaller generator

SureFire™ Heated Hoses

  • Actively controls temperature at the gun
  • Heating element in the hose provides direct heat
    • Heats up to the spray gun
  • True chemical temperature measured at the gun
  • 100’ and 200’ lengths available
  • Actively controls temperature at the gun
  • Heating element in the hose provides direct heat
    • Heats up to the spray gun
  • True chemical temperature measured at the gun
  • 100’ and 200’ lengths available

EASYOUT™ FLUID SYSTEM

  • Quad+ Static packings Vs. Dynamic packings
    • Keeps the pump isolated from environment to prevent crystallization
    • Self-adjusting, self-compensating packing's never need adjustment
    • Fixed wipers completely clean piston rod; no need to clean cylinder or sleeve
    • Only one-piece which makes it the simplest to service
    • Lower repair costs because no wearable cylinder is required
  • Complete fluid section replacement program
    • Manual “Park” function
  • Static packing’s make park less of a necessary function

EASYOUT™ FLUID SECTION

  • Quad+ Static packings Vs. Dynamic packings
    • Keeps the pump isolated from environment to prevent crystallization
    • Self-adjusting, self-compensating packing's never need adjustment
    • Fixed wipers completely clean piston rod; no need to clean cylinder or sleeve
    • Only one-piece which makes it the simplest to service
    • Lower repair costs because no wearable cylinder is required
  • Complete fluid section replacement program
    • Manual “Park” function
  • Static packing’s make park less of a necessary function

HELIX™ FR28 SPECIFICATIONS

  • Max Pressure – 2,000 psi / 136 BAR
  • Max Heat – 140°F / 60°C
  • Output – 28 Lbs./Min or 2.8 GPM/Min
  • Max Hose length – standard with 200’
  • Footprint – 30” x 27” x 37”
  • Weight – 273 lbs / 123 kg
  • Electrical Supply – single phase 230v 48amps
    • Amperage will change with heater wattage function

HELIX™ ACCESSORIES

Transfer Pumps

  • 1:1 & 2:1
  • 5 gallon & 55 gallon
  • Bung mount
  • Built to fit a 6’ 7” trailer

PMC AP2 Spray Gun

  • Proven Reliability
  • Spray, Blast and Pour nozzles available
  • 10-40lb. Operation
  • CE Mark
  • Lightweight and Compact
  • Modular design for ease of maintenance